| Customization: | Available |
|---|---|
| Media: | Water |
| Standard: | Standard |
|
Still deciding? Get samples of US$ 118/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High Performance Plastic Hydraulic Control Valves
Features and Benefits
1.Durable industrial grade valve design and construction uses glass-filled Nylon material to meet rough service conditions.
2.Ultra-high flow capacity with minimal pressure loss.
3.Designed for service on a wide range of pressure and flow conditions, from dripping to maximum flow.
4.Simple design with few parts guarantees easy in-line inspection and service.
5.Positive guided valve plug provides accurate motion and smooth regulation. Avoids chattering and slamming closed.
6.Versatile end connections allow mix of different sizes and connection types. Female thread, Flanged or PVC 'Slip-on' Glue or Grooved adapter (as add-on option).
7.Articulated flange connections isolate the valve from line bending and pressure stresses
ARTHAS basic model diaphragm actuated, hydraulically operated valve is at the leading edge of control valve design. It combines simple and reliable construction with superior performance, while at the same time being virtually free of the typical limitations associated with standard control valves. automatic water control valves are designed for vertical or horizontal installation and are available in sizes of 11 /2", 2", 2"L, 21 /2", 3", 3"L, 4" & 6" DN: 40, 50, 50L, 65, 80, 80L, 100 & 150. made from industrial durable glass-filled nylon, is engineered to meet rough service conditions with high chemical and cavitation resistance. The 'Y' valve body design includes a full bore seat with unobstructed flow path, free of any in-line ribs, supporting cage, or shafts. Its unitized Flexible Super Travel (FST) diaphragm and guided plug provide a significantly 'look through' passage from end to end resulting in ultra-high flow capacity with minimal pressure loss. The combination of a long travel guided valve plug, peripherally supported diaphragm, and replaceable valve seal provides:
1.No chattering or slamming closed
2.Accurate and stable regulation with smooth motion
3.Low operating pressure requirements
4.No diaphragm erosion and distortion
5.Diaphragm and spring fully meet the valve's operating pressure range requirements
6.No UV and frozen effect
7.Chemical resistant
Designed for service under a wide range of pressure and flow conditions, from dripping to maximum flow, the valve excels at being a userfriendly control valve:
1.Simple design with few parts guarantees easy in-line inspection and service.
2.Adaptable on-site to a wide range of end connection types and sizes.
3.Articulated flange connections isolate the valve from pipeline bending and pressure stresses.
Electric switch valve
"Look-through Design"
Straight through flow results in ultra-high flow capacity with minimum pressure loss
Technical Specifications:
Pressure Rating: 10 bar
Operating Pressure Range: 0.5-10 bar
Temperature Range: Water up to 80°C
Standard Materials:
1. Body, Cover and Plug: Glass-Filled Nylon
2. Diaphragm: NBR[Buna-N], Nylon Fabric Reinforced
3. Seals: NBR [Buna-N]
4.Spring: Stainless Steel
5.Cover bolts : Stainless Steel
End Connection Options
|
Basic Hydraulic Valve is a hydraulically self-operated, diaphragm-actuated valve, which uses the hydraulic force of the existing line pressure, or any external hydraulic command (water or air), to open and close. Recommended for all On\Off applications, Model 105-Z is particularly suitable for agricultural irrigation heads, and filter stations. |
|
Electric Valve is a hydraulically self-operated, diaphragm-actuated, solenoidcontrolled valve. The valve opens fully and closes drip-tight in response to an electric signal, which causes the solenoid to open or close the valve's internal hydraulic loop. It operates with a variety of solenoid voltage ranges: 24VAC, 24VDC or 9VDC, 12VDC-latch. Recommended for all electric On\Off applications, Model 110-2W-N is particularly suitable for turf irrigation heads and commercial green house irrigation. The Model 110-2W-N also features a manual override. |
|
Pressure Reducing Valve is a hydraulically self-operated, diaphragm-actuated control valve, which uses the hydraulic force of the line pressure to reduce higher upstream pressure to lower constant downstream pressure regardless of fluctuating demand or varying upstream pressure. The pilot continuously senses the downstream valve pressure and controls the valve's opening and closing rate accordingly, by increasing or decreasing the flow from the valve control chamber to downstream. The quick and accurate response of Model 120-bZ prevents line fill-up surges and pressure peaks, which can be damaging, especially to thin wall irrigation schemes. The unique hYflow design makes the Model 120-bZ the best and most costeffective solution for agricultural irrigation heads in large and medium scale blocks, where flow is high and upstream pressure is liable to drop very low. |
|
Electric Pressure Reducing Valve is a hydraulically self-operated, diaphragm-actuated control valve which uses the hydraulic force of the line pressure to reduce higher upstream pressure to lower constant downstream pressure, regardless of fluctuating demand or varying upstream pressure. The added solenoid enables the opening and shut-off of the valve by an irrigation controller. Pressure reducing performance of the Model 120-55-bZ is similar to that of the Model 120-bZ, thus providing protection for the irrigation equipment whenever the valve opens and throughout the irrigation cycle. Model 120-55-bZ operates with a variety of solenoid voltage ranges: 24VAC, 24VDC or 9VDC, 12VDC-latch. |
OUR SERVICE
1. OEM/ODM services are accepted.
2. Technical support and design personalized solutions by the engineer team.
3. Accept sample order.
4.Quality tracking & service.
5.Provide the free catalog for you.
6.Various irrigation products for your choice.
7.Warranty: All our products have 1 year warranty. If there's any quality problems during the warranty period, we ship new spare parts for replacement free for you.
COMPANY PROFILE
Founded in 2008, Fuzhou Arthas Fluid Equipment Technology CO., Ltd. is a professional irrigation product manufacturer with the integration of R&D, production and sales. we are committed to developing and producing equipment of the water treatment, water filtration systems. Our products are widely applied in agriculture irrigation, urban landscape irrigation, golf course irrigation, industrial water recycle.
Located in Fuzhou China, our company possess15000 m2 modernized industrial plants including the molding, plastic injection, metal stamping, electronic appliances and assembly lines. Our company is very strong in supplying chain management and integrated production. Our products are exported to Europe, U.S.A., North America and Southeast Asia etc. We have been offering OEM service for many famous companies worldwide. We have passed the ISO9001 quality system certification and CE certification
We always abides by the value of "innovation & creation, customer orientation, dynamic & enthusiasm, integrity and honesty". We apply the core competence "scientific and technological innovation" to make contribution to water conservation, industrial water recycling etc. We are devoted to bring a better environment for the earth by our continuous efforts.
WORKSHOP AND SHOWROOM
OUR PROJECT
EXHIBITION
CERTIFICATE
Contact us
Welcome your inquiry and cooperation!
Eric (Sales Manager)
Mob:+8613774516031
){kind=link}